DUSTBANE – ORBIT
“All System” Floor Finish
Developed for use in high profile areas where the ultimate “wet look” gloss and durability are desired. Its high solid content builds the required film thickness with fewer of coats.
| Format | Code |
|---|---|
| 4 L | 52064 |
| 20 L | 52066 |
How To Use
Preparation: Before your initial application, the floor must be stripped of any old finish, rinsed thoroughly with potable water and allowed to dry. Sealing the floor is recommended prior to applying a floor finish.
Application: Using a clean mop and bucket, apply 1-3 coats (depending on the porosity of the floor) allowing the floor to completely dry between coats, at least 30 minutes or more.
Maintenance: Dust and/or wet mop daily. Spray buff as needed. For best results, after damp mopping with a neutral floor detergent, apply Orbit diluted at 1:4, let dry for 30 minutes then burnish the floor. Burnishing daily is highly recommended but not imperative.
Coverage: Coverage per 4 L is 149 m² (1600 ft²) to 232 m² (2500 ft²) depending upon porosity of the floor.
Where To Use
Suitable for all resilient and non-resilient floors except for unsealed wood and cork.
