Glacier
High Solids Floor Finish
A true 25% high solids floor finish. By applying 1 to 2 coats you will get the results of 3 to 4 coats of other floor finishes. This floor finish will save physical energy, labour and will lower maintenance costs.
| Format | Code |
|---|---|
| 5 L | 53935 |
| 20 L | 53936 |
How To Use
Preparation: Before your initial application, the floor must be stripped of any old finish, rinsed thoroughly with potable water and allowed to dry. Sealing the floor is recommended before the application of the floor finish.
Application: Using a clean mop and bucket, apply 1-3 coats (depending on the porosity of the floor) allowing the floor to completely dry between coats, at least 45 minutes or more.
Maintenance: Sweep or dry mop frequently. Wet mop or auto-scrub periodically with a properly diluted neutral detergent. Scrub and recoat worn traffic areas as required. Spray buff as needed.
Coverage: Coverage per 5 L is 186 m² (2000 ft²) to 297 m² (3200 ft²) depending upon porosity of the floor.
Where To Use
Suitable for all resilient and non-resilient floors except for unsealed wood and cork.
